BISE Multan 10th Class Result 2026 – Check Matric Result by Roll Number, Name, SMS and Gazette

The **BISE Mul on 6 August 2026 at 10:00 AM for regular and private candidates who appeared in the SSC Part II First Annual Examination. Students from Multan, Khanewal, Vehari and Lodhran will be able to check their subject-wise marks, total score, grade and result status through the official Multan Board result portal.

The Board of Intermediate and Secondary Education Multan has a dedicated online page for 10th and combined results, along with separate sections for matric result gazettes, position holders and examination statistics. reported BISE Multan result date 2026 is 6 August at 10:00 AM. However, students should treat it as an expected schedule until the board publishes an official result notification. The board’s official statistical-data section currently lists the 2025 10th annual result as its latest matric result dataset rather than the 2026 result. lt is declared, candidates will be able to check the Multan Board Matric Result 2026 through:

• Roll number
• SMS
• Result gazette
• School or institution
• Candidate record and result-card services

The BISE Multan Matric Result 2026 is expected on 6 August 2026 at approximately 10:00 AM. This schedule is being reported for the Multan Board and other Punjab education boards, but it has not yet appeared as a final result announcement on the official Multan Board website. ld distinguish between an expected result date and an officially confirmed one.

At present:

• The SSC First Annual Examination 2026 cycle is active.
• The official board website has published the 2026 matric date-sheet information.
• The dedicated 10th-class result page is available.
• The 2026 result statistics and gazette have not yet been listed publicly.
• Final confirmation of the result date is still awaited.

The official website has already published the SSC 9th and 10th First Annual Examination 2026 date-sheet notification, confirming the current examination cycle. ld continue checking the official website because the board may publish a press release, result notification or updated portal before the expected result day.

The BISE Multan SSC Part 2 Result 2026 is the final matric-level result for students who completed their 10th-class board examinations under the Multan Board.

The same result is frequently searched using different terms, including:

• BISE Multan 10th Class Result 2026
• Multan Board Matric Result 2026
• BISE Multan SSC Part 2 Result 2026
• Multan Board 10th Result by Roll Number
• BISE Multan Result 2026 Class 10
• 10th Class Result 2026 Multan Board
• SSC Part II Result Multan Board
• BISE Multan Matric Result by Name
• Multan Board Result Gazette 2026
• BISE Multan Result Check Online

The result determines whether the student has completed the Secondary School Certificate examination requirements. It may be needed for intermediate admission, technical education, scholarship applications, migration, document verification and future academic records.

The jurisdiction of BISE Multan includes four districts:

• Multan
• Khanewal
• Vehari
• Lodhran

The board’s official jurisdiction page confirms that institutions and candidates from these four districts fall under BISE Multan. therefore search for the same result using location-based terms such as:

• Multan district 10th class result 2026
• Khanewal matric result 2026
• Vehari 10th class result 2026
• Lodhran matric result 2026
• Multan Division SSC result 2026
• BISE Multan result Khanewal
• BISE Multan result Vehari
• BISE Multan result Lodhran

All four districts generally follow the same board result schedule and checking process.

Students will have several methods to check the BISE Multan 10th Result 2026 after its announcement.

The main result-checking methods are:

1. Roll number
2. SMS
3. Matric result gazette
4. School or institution
5. Private candidate result-card portal

The official BISE Multan website provides dedicated services for 9th results, 10th results, private result cards, student-record tracing, matric gazettes, position holders and statistical information. er method is usually the most convenient option for checking an individual candidate’s detailed result.

Students can check the BISE Multan 10th Class Result 2026 by roll number through the official 10th and combined result page.

Follow these steps:

1. Open the official BISE Multan website.
2. Select the SSC or Matric section.
3. Open “Know Your Results 10th.”
4. Select the correct examination session.
5. Choose the SSC First Annual Examination 2026 result.
6. Enter the complete roll number.
7. Complete any security verification shown on the page.
8. Select the search or submit button.
9. Check the student’s name and examination details.
10. Save or print the result page.

The official Multan Board result service is specifically designed for 10th and combined results and requests the student’s roll number and examination session. on Needed for Roll Number Search

Keep the following information ready before the result is announced:

• Complete examination roll number
• Examination year
• First Annual or Second Annual category
• 10th or combined examination category
• A stable internet connection

Enter the roll number exactly as printed on the official roll-number slip.

A “no result found” message does not necessarily mean that the candidate has failed.

The result may not appear because:

• The result has not been activated yet.
• The wrong examination year was selected.
• SSC Part I was selected instead of SSC Part II.
• Second Annual was selected instead of First Annual.
• The roll number was entered incorrectly.
• The result portal is experiencing heavy traffic.
• The candidate belongs to another education board.
• The result has been withheld.
• A security code was entered incorrectly.
• The board is updating the result database.

Check the roll number carefully and try again after a short interval. Students should also confirm that their school or examination centre falls under BISE Multan.

Students often search for the BISE Multan 10th Class Result 2026 by name when they cannot find their roll-number slip.

The official individual-result page is primarily designed around roll number and examination-session information. A candidate who does not remember the roll number may use the matric gazette or contact the relevant school.

To search through the gazette:

1. Download the official BISE Multan Matric Gazette 2026.
2. Open the PDF on a computer or mobile device.
3. Use the search function.
4. Enter the candidate’s complete name.
5. Review all matching records.
6. Match the father’s name, school or district.
7. Note the correct roll number.
8. Verify the result through the official result portal.

Name searches can return more than one student. Always use the roll number, institution or father’s name to confirm the correct candidate.

A student who has lost the roll-number slip can try the following sources:

• School examination office
• School candidate list
• Admission form
• Registration record
• Photograph of the roll-number slip
• Class WhatsApp group
• Previous school messages
• Board record-tracing service
• Official matric result gazette

The BISE Multan website includes a separate Trace Your Record 10th service, which can help candidates locate examination-related information. nts should contact their school first. Private candidates can check their admission documents or use the relevant board student portal.

Students without reliable internet access can check the Multan Board Matric Result 2026 by SMS.

The commonly reported BISE Multan SMS code is 800293. steps:

1. Open the messaging application on your phone.
2. Type the complete roll number.
3. Do not include the student’s name or additional words.
4. Send the message to 800293.
5. Wait for the board’s response.

Example:

123456

Send to:

800293

The reply may include:

• Candidate’s name
• Roll number
• Total obtained marks
• Result status

The SMS reply may not contain a complete subject-wise marks sheet. Students should check the online result card later for detailed marks.

Before using the SMS service:

• Confirm the roll number.
• Keep sufficient mobile balance.
• Send the message after the official result announcement.
• Avoid sending repeated messages within a few seconds.
• Wait longer if mobile networks are busy.
• Verify the SMS code from the board’s final result notice.

Because result codes and procedures can be reconfirmed for each examination cycle, students should verify 800293 through the official 2026 announcement before sending the message.

The BISE Multan Result Gazette 2026 is a consolidated result document containing the records of students included in the matric examination.

The official Multan Board website has a separate section for SSC result gazettes. Its currently listed records include the SSC First Annual Examination 2025 and previous matric examinations. 6 result is declared, the new gazette may be added to the same section.

How to Download the Multan Board Gazette

1. Open the official BISE Multan website.
2. Select “Exams & Results.”
3. Open “Result Gazette Matric.”
4. Find the SSC First Annual Examination 2026 gazette.
5. Confirm the examination year.
6. Download the PDF file.
7. Open it using a PDF reader.
8. Search by roll number, name or institution.

Use the following document-search commands:

• Ctrl + F on Windows
• Command + F on macOS
• “Find in document” on Android or iPhone

Who Should Use the Gazette?

The gazette is particularly useful for:

• Students who have forgotten their roll number
• Schools checking several candidates
• Teachers reviewing institutional performance
• Parents comparing school results
• Website administrators compiling result information
• Candidates experiencing problems with the individual result portal

Students should download the gazette only from the official board website or a source that clearly preserves the original board file.

The BISE Multan 10th Class result card may contain:

• Candidate’s name
• Father’s name
• Roll number
• Registration number
• Examination session
• Examination year
• Candidate category
• School or institution
• Subject names
• Theory marks
• Practical marks
• Subject-wise status
• Total obtained marks
• Overall result status
• Grade
• Reappear subjects
• Absence remarks
• Result-withheld remarks

Students should verify all details before submitting the online result for college admission.

The exact subjects shown on the result depend on the candidate’s registered study group.

Common subjects may include:

Compulsory Subjects

• English
• Urdu
• Pakistan Studies
• Islamiat or Religious Education
• Translation of the Holy Quran, where applicable

Science Group Subjects

• Mathematics
• Physics
• Chemistry
• Biology or Computer Science

Humanities Group Subjects

Humanities students may have different elective subjects based on their registered subject combination.

Practical Components

Practical marks may be included in:

• Physics
• Chemistry
• Biology
• Computer Science
• Technical or vocational subjects

Students must check that both theory and practical marks are shown correctly.

A student should review the theory and practical components separately.

Check whether:

• Theory marks are displayed.
• Practical marks are displayed.
• The correct practical subject is listed.
• No paper is incorrectly marked absent.
• The subject total has been calculated.
• The result status matches the subject marks.

A missing practical entry can affect the overall subject result. Contact the school or board if marks are absent or attached to the wrong subject.

The online result may show different terms.

Passed

The candidate has completed the examination requirements shown on the result card.

Reappear

The candidate needs to appear again in one or more subjects under the applicable board rules.

Absent

The board record shows that the candidate did not appear in a theory paper or practical examination.

Result Withheld

The result has not been released because further verification or administrative processing may be required.

A withheld result should not automatically be considered a failed result. The student should contact BISE Multan or the relevant institution.

Result Later

The result of a candidate or subject may be announced separately after the board completes the required process.

Marks Improvement

The candidate appeared again to improve marks or grade under the board’s current improvement policy.

Use the obtained marks and total marks shown on the result card.

Formula:

Percentage = Obtained Marks ÷ Total Marks × 100

Example:

A student obtains 1,020 marks out of 1,200:

1020 ÷ 1200 × 100 = 85%

This is only an example. Students should use the total marks printed on their official result card because the total may depend on their examination scheme and registered subjects.

Before using the result for intermediate admission, verify:

• Student’s name
• Father’s name
• Roll number
• Registration number
• Date of birth, where displayed
• Examination session
• School or institution
• Subject combination
• Theory marks
• Practical marks
• Total marks
• Grade
• Pass or reappear status
• Board remarks

A spelling error or incorrect personal detail should be reported promptly. Incorrect information can create problems during admission, migration, certificate issuance or verification.

After checking the Multan Board 10th Class Result 2026, students should:

1. Save the result as a PDF.
2. Take a clear screenshot.
3. Print a copy if needed.
4. Check every subject carefully.
5. Verify personal information.
6. Review college admission deadlines.
7. Select an appropriate intermediate programme.
8. Apply for rechecking if necessary.
9. Check Second Annual Examination instructions if required.
10. Collect the official result card from the school or board channel.

The online result is primarily used for immediate information. Colleges may later ask for the original or officially issued result card.

Students can choose among several programmes after passing the matric examination:

• FSc Pre-Medical
• FSc Pre-Engineering
• Intermediate in Computer Science
• ICom
• FA Humanities
• General Science
• Diploma of Associate Engineering
• Technical education
• Vocational training
• Commerce courses
• Computer and information-technology programmes

The appropriate choice depends on the student’s marks, subject interests, career plans and college merit requirements.

The BISE Multan 10th Class position holders 2026 may be announced around the main result declaration.

The official Multan Board website includes a dedicated matric position-holder section. list may include:

• Overall first position
• Overall second position
• Overall third position
• Science-group positions
• Humanities-group positions
• Candidate names
• Roll numbers
• Institutions
• Obtained marks
• Examination category

Position-holder names and marks should not be published before the board issues an official list. Social media images and unofficial merit lists may contain incorrect information.

The board may publish detailed statistical information after announcing the result.

The statistics can include:

• Registered candidates
• Appeared candidates
• Passed candidates
• Overall pass percentage
• Male and female results
• Regular and private candidate performance
• Group-wise pass percentages
• Institution-wise pass percentages
• Subject-wise statistics

BISE Multan maintains a dedicated matric statistical-data section. At present, its newest listed 10th annual dataset is for 2025, so 2026 statistics should only be added after the board publishes them. stimated pass percentages or copying figures from another Punjab board.

Students who believe that their marks contain a counting, transfer or marking-record issue may apply for BISE Multan paper rechecking.

According to the official board FAQ, candidates may apply for rechecking within 15 days after the declaration of the result after depositing the prescribed fee through HBL. The application may be submitted online or manually according to the board’s procedure. y verify whether:

• Every attempted answer was checked.
• Marks were added correctly.
• Marks were transferred correctly.
• The subject total is accurate.
• No page remained unchecked.
• The marks on the award list match the result record.

Rechecking should not be described as a complete re-evaluation of every answer.

Before applying, confirm:

• Rechecking deadline
• Fee per subject
• Challan method
• Eligible examination session
• Required documents
• Application status
• Rechecking appointment or schedule

The official website provides a separate online rechecking application service. Annual Examination 2026

Candidates who receive a reappear, failed or absent status may be eligible for the BISE Multan SSC Second Annual Examination 2026.

Possible categories may include:

• Candidates with one or more failed subjects
• Students absent from a paper
• Candidates appearing for marks improvement
• Grade-improvement candidates
• Candidates permitted under current board regulations

Students should wait for the official Second Annual admission notification before relying on any fee, deadline or examination date.

BISE Multan provides separate online services for private candidates, including:

• Private admissions
• Private roll-number slips
• Private result cards
• Record tracing
• Rechecking applications

These services are listed in the student section of the official board portal. dates should keep their registration information, admission-form number and roll number available.

Students may need a duplicate result card or certificate when an original document is:

• Lost
• Damaged
• Incorrect
• Unavailable
• Required for urgent admission
• Required for employment or verification

Applicants should use the board’s official application forms and fee structure. They may need to provide:

• Roll number
• Registration number
• Examination year
• Identity documents
• Fee challan
• Supporting application
• Contact information

Do not submit identity documents or examination records through an unofficial website.

A verified matric record may be required for:

• Intermediate admission
• Scholarship applications
• Employment
• Migration to another board
• Foreign education
• Certificate attestation
• Government applications
• Institutional verification

Students should check whether the receiving institution requires an online verification, sealed document, attested copy, migration certificate or NOC.

The official Multan Board portal includes application forms, NOC services, certificate-status services and application tracking. If the Result Website Is Slow

The official result portal may become slow when many students open it simultaneously.

Try these steps:

1. Recheck the official website address.
2. Refresh the page after a short interval.
3. Enter the roll number again.
4. Use another browser.
5. Switch between Wi-Fi and mobile data.
6. Clear the browser cache.
7. Use the SMS method.
8. Download the result gazette.
9. Contact the school.
10. Avoid pressing the submit button repeatedly.

Students should never enter their B-Form number, CNIC, password or other personal data on an unknown result website.

Students can contact the board regarding a withheld result, incorrect marks entry, practical result, certificate, verification or rechecking.

Public Inquiry and Facilitation Centre: 061-9210125
Controller of Examinations: 061-9210014
Assistant Controller Matric: 061-9210030
System Analyst: 061-9210036
Facilitation email: facilitation@bisemultan.edu.pk
Matric branch email: matric@bisemultan.edu.pk
Controller email: controller@bisemultan.edu.pk

The official postal address is:

Board of Intermediate and Secondary Education, Near Gol Bagh Park, Gulgasht Colony, Bosan Road, Multan, Pakistan, 60750.

These details are listed on the official BISE Multan contact pages. Asked Questions

When will the BISE Multan 10th Class Result 2026 be announced?

The result is expected on 6 August 2026 at 10:00 AM. The date should be treated as expected until BISE Multan issues its official result notification. ultan Board Matric Result 2026 been announced?

No. As of 30 July 2026, the official board’s matric statistical section still lists the 2025 10th annual result as its latest available dataset, and the 2026 result announcement is awaited. check the BISE Multan result by roll number?

Open the official “Know Your Results 10th” page, select the correct examination session, enter your roll number and submit the form. he BISE Multan result SMS code?

The commonly reported SMS code for BISE Multan is 800293. Students should send only their roll number and verify the code from the official result notification. ck the Multan Board result by name?

Students may search the official result gazette by name. They should match the father’s name, institution and roll number because multiple candidates may have similar names.

Which districts are included in BISE Multan?

BISE Multan covers Multan, Khanewal, Vehari and Lodhran districts. I download the BISE Multan Gazette 2026?

After the result is announced, open the official BISE Multan matric result-gazette section and download the SSC First Annual Examination 2026 PDF. te candidates check their results online?

Yes. Private candidates can use the official 10th-result portal and private result-card services provided by BISE Multan. ld I do if my result is withheld?

Contact your school or the BISE Multan Matric Branch to determine the reason. A withheld result may require document verification or administrative processing.

How many days are available for paper rechecking?

The official board FAQ states that a candidate may apply for rechecking within 15 days after the declaration of the result. rechecking the same as re-evaluation?

Not necessarily. Rechecking generally verifies checking, counting and transfer of marks rather than reassessing every answer from the beginning.

Is the online result card the original certificate?

No. The online result provides immediate examination information. Students may later need the official result card or SSC certificate for admission and verification.

When will Multan Board announce the position holders?

Position holders may be announced around the main result declaration. Names and marks should only be published after they appear in the board’s official position-holder section.

What happens if a student fails one or more subjects?

The candidate may be eligible to appear in the SSC Second Annual Examination according to the board’s current rules and admission schedule.

How do I calculate my matric percentage?

Divide obtained marks by total marks and multiply the answer by 100.

Obtained Marks ÷ Total Marks × 100

The BISE Multan 10th Class Result 2026 is expected on 6 August 2026 at 10:00 AM, but students should wait for the final announcement from the Board of Intermediate and Secondary Education Multan.

Candidates from Multan, Khanewal, Vehari and Lodhran should keep their roll numbers ready and use the official BISE Multan result portal whenever possible. If the website is slow, students can use the verified SMS service or download the BISE Multan Matric Result Gazette 2026 after publication.

After viewing the result, save a copy, check all personal and academic information and review college admission deadlines. Students who find a possible counting or marks-transfer issue can submit a rechecking application within the period specified by the board.

Position-holder names, pass percentages, result statistics and Second Annual dates should only be added after BISE Multan publishes its official 2026 documents.